Boguslawsky Crater on the Moon: Landing Site Selection for the <Emphasis Type="Italic">Luna–Glob</Emphasis> Mission Descent Module     

M. A. Ivanov  M. Ya. Marov  A. T. Basilevsky  Yu. A. Kostitsyn 《Solar System Research》2018,52(7):570-577

The article reviews the results of photo geological study of the lunar surface in terms of selection of most favorable landing sites from the point of view of science merit and safety for the Luna—Glob mission descent module.  相似文献   

Deep-water sediment transport patterns and basin floor topography in early rift basins: Plio-Pleistocene syn-rift of the Corinth Rift,Greece     

Martin Muravchik  Gijs A. Henstra  Gauti T. Eliassen  Rob L. Gawthorpe  Mike Leeder  Haralambos Kranis  Emmanuel Skourtsos  Julian Andrews 《Basin Research》2020,32(5):1184-1212

Our current understanding on sedimentary deep-water environments is mainly built of information obtained from tectonic settings such as passive margins and foreland basins. More observations from extensional settings are particularly needed in order to better constrain the role of active tectonics in controlling sediment pathways, depositional style and stratigraphic stacking patterns. This study focuses on the evolution of a Plio-Pleistocene deep-water sedimentary system (Rethi-Dendro Formation) and its relation to structural activity in the Amphithea fault block in the Corinth Rift, Greece. The Corinth Rift is an active extensional basin in the early stages of rift evolution, providing perfect opportunities for the study of early deep-water syn-rift deposits that are usually eroded from the rift shoulders due to erosion in mature basins like the Red Sea, North Sea and the Atlantic rifted margin. The depocentre is located at the exit of a structurally controlled sediment fairway, approximately 15 km from its main sediment source and 12 km basinwards from the basin margin coastline. Fieldwork, augmented by digital outcrop techniques (LiDAR and photogrammetry) and clast-count compositional analysis allowed identification of 16 stratigraphic units that are grouped into six types of depositional elements: A—mudstone-dominated sheets, B—conglomerate-dominated lobes, C—conglomerate channel belts and sandstone sheets, D—sandstone channel belts, E—sandstone-dominated broad shallow lobes, F—sandstone-dominated sheets with broad shallow channels. The formation represents an axial system sourced by a hinterland-fed Mavro delta, with minor contributions from a transverse system of conglomerate-dominated lobes sourced from intrabasinal highs. The results of clast compositional analysis enable precise attribution for the different sediment sources to the deep-water system and their link to other stratigraphic units in the area. Structures in the Amphithea fault block played a major role in controlling the location and orientation of sedimentary systems by modifying basin-floor gradients due to a combination of hangingwall tilt, displacement of faults internal to the depocentre and folding on top of blind growing faults. Fault activity also promoted large-scale subaqueous landslides and eventual uplift of the whole fault block.  相似文献   

Seasonal Variations in the Grain Size Distribution and Mineral Composition of Suspended Particulate Matter of the Northern Dvina River     

Gordeev  V. V.  Dara  O. M.  Alekseeva  T. N.  Kochenkova  A. I.  Boev  A. G.  Lokhov  A. S.  Belorukov  S. K. 《Oceanology》2020,60(3):384-392

Oceanology - The paper presents the first results of a study of seasonal variations in the grain size distribution and mineral compositions of suspended particulate matter (SPM) of the Northern...  相似文献   

Finite Element Solvers for Biot’s Poroelasticity Equations in Porous Media     

Kadeethum  T.  Lee  S.  Nick  H. M. 《Mathematical Geosciences》2020,52(8):977-1015

We study and compare five different combinations of finite element spaces for approximating the coupled flow and solid deformation system, so-called Biot’s equations. The permeability and porosity fields are heterogeneous and depend on solid displacement and fluid pressure. We provide detailed comparisons among the continuous Galerkin, discontinuous Galerkin, enriched Galerkin, and two types of mixed finite element methods. Several advantages and disadvantages for each of the above techniques are investigated by comparing local mass conservation properties, the accuracy of the flux approximation, number of degrees of freedom (DOF), and wall and CPU times. Three-field formulation methods with fluid velocity as an additional primary variable generally require a larger number of DOF, longer wall and CPU times, and a greater number of iterations in the linear solver in order to converge. The two-field formulation, a combination of continuous and enriched Galerkin function space, requires the fewest DOF among the methods that conserve local mass. Moreover, our results illustrate that three out of the five methods conserve local mass and produce similar flux approximations when conductivity alteration is included. These comparisons of the key performance indicators of different combinations of finite element methods can be utilized to choose the preferred method based on the required accuracy and the available computational resources.

  相似文献   

Intercomparison of measurements of bulk snow density and water equivalent of snow cover with snow core samplers: Instrumental bias and variability induced by observers     

J. Ignacio López-Moreno  Leena Leppänen  Bartłomiej Luks  Ladislav Holko  Ghislain Picard  Alba Sanmiguel-Vallelado  Esteban Alonso-González  David C. Finger  Ali N. Arslan  Katalin Gillemot  Aynur Sensoy  Arda Sorman  M. Cansaran Ertaş  Steven R. Fassnacht  Charles Fierz  Christoph Marty 《水文研究》2020,34(14):3120-3133

Manually collected snow data are often considered as ground truth for many applications such as climatological or hydrological studies. However, there are many sources of uncertainty that are not quantified in detail. For the determination of water equivalent of snow cover (SWE), different snow core samplers and scales are used, but they are all based on the same measurement principle. We conducted two field campaigns with 9 samplers commonly used in observational measurements and research in Europe and northern America to better quantify uncertainties when measuring depth, density and SWE with core samplers. During the first campaign, as a first approach to distinguish snow variability measured at the plot and at the point scale, repeated measurements were taken along two 20 m long snow pits. The results revealed a much higher variability of SWE at the plot scale (resulting from both natural variability and instrumental bias) compared to repeated measurements at the same spot (resulting mostly from error induced by observers or very small scale variability of snow depth). The exceptionally homogeneous snowpack found in the second campaign permitted to almost neglect the natural variability of the snowpack properties and focus on the separation between instrumental bias and error induced by observers. Reported uncertainties refer to a shallow, homogeneous tundra-taiga snowpack less than 1 m deep (loose, mostly recrystallised snow and no wind impact). Under such measurement conditions, the uncertainty in bulk snow density estimation is about 5% for an individual instrument and is close to 10% among different instruments. Results confirmed that instrumental bias exceeded both the natural variability and the error induced by observers, even in the case when observers were not familiar with a given snow core sampler.  相似文献   

Geochemical Composition of Dolerites as an Indicator of the Distance of a Dike Swarm from the Mantle Plume Center (Case Study of Proterozoic Dike Swarms,Siberian Craton)     

Gladkochub  D. P.  Donskaya  T. V. 《Doklady Earth Sciences》2020,491(2):243-246

Doklady Earth Sciences - Based on investigation of Proterozoic mafic dike swarms of the Siberian Craton, we inferred how the geochemical and isotopic characteristics of dike swarms of dolerites of...  相似文献   

An introduction to the classification of the physiognomic landscape types: methodology and results of testing in the area of Kazimierz Landscape Park (Poland)     

Malwina Michalik-Śnieżek  S. Chmielewski  T. J. Chmielewski 《自然地理学》2019,40(4):384-404

The publication of the European Landscape Convention (2000) had a stimulating effect on the development of both new systems of landscape classification and new methods of their evaluation and mapping. As an example, a new classification of physiognomic landscape types was developed in Poland in 2014. The objectives of the paper are to (1) popularize, on the international scale, the classification of physiognomic landscape types in a new, improved version, (2) present the original method of physiognomic landscape types mapping with the use of the system of basic landscape units, and (3) present the results of testing of the method in the area of the Kazimierz Landscape Park, Poland. In the area of the Kazimierz Landscape Park, 491 basic landscape units were delimited, within which, on the basis of the leading traits of land relief and cover forms, the physiognomic landscape types were identified. Maps of this type can be important tools in implementing the recommendations of the European Landscape Convention. The total number of physiognomic landscape types identified within a specific area can be one of the key indicators of landscape diversity.  相似文献   

A Mesocyclone over the Northern Sea of Japan in February 2013     

Potalova  E. Yu.  Kleshcheva  T. I.  Permyakov  M. S. 《Oceanology》2019,59(6):814-822

Oceanology - The article considers a particular event in the influence of a mesoscale cyclone (MC) on the northern Sea of Japan on February 10–11, 2013. The passage of the MC was accompanied...  相似文献   

Spectral analysis of continuous redox data reveals geochemical dynamics near the stream–aquifer interface     

Corey D. Wallace  Audrey H. Sawyer  Rebecca T. Barnes 《水文研究》2019,33(3):405-413

Changes in streamflow and water table elevation influence oxidation–reduction (redox) conditions near river–aquifer interfaces, with potentially important consequences for solute fluxes and biogeochemical reaction rates. Although continuous measurements of groundwater chemistry can be arduous, in situ sensors reveal chemistry dynamics across a wide range of timescales. We monitored redox potential in an aquifer adjacent to a tidal river and used spectral and wavelet analyses to link redox responses to hydrologic perturbations within the bed and banks. Storms perturb redox potential within both the bed and banks over timescales of days to weeks. Tides drive semidiurnal oscillations in redox potential within the streambed that are absent in the banks. Wavelet analysis shows that tidal redox oscillations in the bed are greatest during late summer (wavelet magnitude of 5.62 mV) when river stage fluctuations are on the order of 70 cm and microbial activity is relatively high. Tidal redox oscillations diminish during the winter (wavelet magnitude of 2.73 mV) when river stage fluctuations are smaller (on the order of 50 cm) and microbial activity is presumably low. Although traditional geochemical observations are often limited to summer baseflow conditions, in situ redox sensing provides continuous, high‐resolution chemical characterization of the subsurface, revealing transport and reaction processes across spatial and temporal scales in aquifers.  相似文献   

Evaluation of a simple,inexpensive, in situ sampler for measuring time‐weighted average concentrations of suspended sediment in rivers and streams     

Nicholas J.C. Doriean  Peter R. Teasdale  David T. Welsh  Andrew P. Brooks  William W. Bennett 《水文研究》2019,33(5):678-686

The accurate measurement of suspended sediment (<200 μm) in aquatic environments is essential to understand and effectively manage changes to sediment, nutrient, and contaminant concentrations on both temporal and spatial scales. Commonly used sampling techniques for suspended sediment either lack the ability to accurately measure sediment concentration (e.g., passive sediment samplers) or are too expensive to deploy in sufficient number to provide landscape‐scale information (e.g., automated discrete samplers). Here, we evaluate a time‐integrated suspended sediment sampling technique, the pumped active suspended sediment (PASS) sampler, which collects a sample that can be used for the accurate measurement of time‐weighted average (TWA) suspended sediment concentration and sediment particle size distribution. The sampler was evaluated against an established passive time‐integrated suspended sediment sampling technique (i.e., Phillips sampler) and the standard discrete sampling method (i.e., manual discrete sampling). The PASS sampler collected a sample representative of TWA suspended sediment concentration and particle size distribution of a control sediment under laboratory conditions. Field application of the PASS sampler showed that it collected a representative TWA suspended sediment concentration and particle size distribution during high flow events in an urban stream. The particle size distribution of sediment collected by the PASS and Phillips samplers were comparable and the TWA suspended sediment concentration of the samples collected using the PASS and discrete sampling techniques agreed well, differing by only 4% and 6% for two different high flow events. We should note that the current configuration of the PASS sampler does not provide a flow‐weighted measurement and, therefore, is not suitable for the determination of sediment loads. The PASS sampler is a simple, inexpensive, and robust in situ sampling technique for the accurate measurement of TWA suspended sediment concentration and particle size distribution.  相似文献